點擊圖片查看原圖
- 客戶訂貨時應注明型號、公稱通徑或英寸、公稱壓力或磅級、連接形式、結構長度及其他參數。
- 法蘭連接：按JB/T79.1、GB9113.13.25SFUW、HG20592-97，如需其他標準的法蘭（ANSI、DIN、BS、SH、JD等標準）應須注明。
- 螺紋及承插焊連接：螺紋采用英制55度圓錐管內螺紋、國際Rc（ZR），如需其他標準（NPT、BSPT、PT）應需注明。
二、性能范圍：應注明最高工作壓力PMO；最高工作溫度TMO；最大凝結水排量QHMA（Kg/h）；和蒸汽設備的工藝要求特點。以選型適應性能特點。
三、產品設計制造按照JB/9093-2005《蒸汽疏水閥技術條件》（ZBJ16007-90）標準執行，產品質量分等按JB/TQ411-89執行。
四、用戶如有特殊非標準要求的產品，本廠可承制其它型號及非標疏水閥、空氣閥、汽水分離器及以國代進產品。
Order note
- When making order,the customer should clearly indicate the type,nominal diameter or inch,nominal pressure or scale,connection mode,length and other parameters.
- Connection by flange:we provide such types as JB/T79.1,GB113.25SFUW,HG20592-97;if there are other needs (type ANSI,DIN,BS,SH,and JD),please clearly indicate your request.
- Connection by screw and welding:the screw asopred in accordance with 550 taper screw,and Rc(ZG),if there are other needs (NPT,BSPT and PT),please clearly indicate your request.
- Performances:please indicate that the largest working pressure if PMO,the largest working remoerature is TMO,the largest amount of water discharged is QHMA(Kg/h) and the.
- The design and production of the conducted according to the stangdard of JB/9093-2005(Techniques of Steam Trap)and the quality of the product in compliance with JB/TQ411-89.
- If you have other special request on the products,we can also provide reap,gas valves,as well as water and steam separator in other type and imported ones.
| Size 規格 |
Desgin pressure(MPa) 設計壓力 |
Extermal dimensions(mm)外型尺寸 | Weight（Kg） 重量 |
Voulume（L） 容量 |
|||||||||
| A | B | C | D | E | F | G | H | I | J | ||||
| DN65 | 1.6 | 420 | 250 | 640 | 219 | 160 | 1” | 3/4” | 100 | 265 | 30 | 46.5 | 18 |
| 2.5 | 420 | 250 | 640 | 219 | 160 | 1” | 3/4” | 100 | 265 | 30 | 49 | 18 | |
| DN80 | 1.6 | 525 | 330 | 735 | 273 | 145 | 2” | 3/4” | 125 | 370 | 30 | 80 | 33 |
| 2.5 | 525 | 330 | 735 | 273 | 145 | 2” | 3/4” | 125 | 370 | 30 | 88 | 33 | |
| DN100 | 1.6 | 575 | 335 | 795 | 324 | 165 | 2” | 3/4” | 125 | 385 | 40 | 98 | 50 |
| 2.5 | 575 | 335 | 795 | 324 | 165 | 2” | 3/4” | 125 | 385 | 40 | 106 | 50 | |
| DN125 | 1.6 | 656 | 312 | 845 | 356 | 230 | 2” | 3/4” | 150 | 415 | 44 | 115 | 67 |
| 3.0 | 656 | 312 | 845 | 356 | 230 | 2” | 3/4” | 150 | 415 | 44 | 134 | 67 | |
| DN150 | 1.6 | 706 | 345 | 935 | 406 | 245 | 2” | 3/4” | 150 | 465 | 60 | 154 | 96 |
| 3.0 | 706 | 345 | 935 | 406 | 245 | 2” | 3/4” | 150 | 465 | 60 | 172 | 96 | |
| DN200 | 0.6 | 850 | 465 | 1200 | 500 | 375 | 2” | 2” | 175 | 560 | 60 | 275 | 185 |
| 1.6 | 850 | 465 | 1200 | 500 | 375 | 2” | 2” | 175 | 560 | 60 | 280 | 185 | |
| 3.0 | 858 | 460 | 1200 | 508 | 375 | 2” | 2” | 175 | 565 | 60 | 280 | 230 | |
| DN250 | 0.6 | 950 | 615 | 1580 | 600 | 532 | 2” | 2” | 175 | 685 | 72 | 475 | 335 |
| 1.6 | 950 | 615 | 1580 | 600 | 532 | 2” | 2” | 175 | 685 | 72 | 475 | 335 | |
| 3.0 | 960 | 615 | 1580 | 610 | 532 | 2” | 2” | 175 | 695 | 72 | 475 | 333 | |
| DN300 | 0.6 | 1000 | 740 | 1700 | 600 | 542 | 2” | 2” | 200 | 685 | 72 | 500 | 330 |
| 1.6 | 1000 | 740 | 1700 | 600 | 542 | 2” | 2” | 200 | 685 | 72 | 500 | 330 | |
| 3.0 | 1010 | 740 | 1700 | 610 | 542 | 2” | 2” | 200 | 695 | 72 | 500 | 330 | |
| DN350 | 0.6/1.6/3.0 | 1100 | 755 | 1800 | 700 | 526 | 2” | 2” | 200 | 815 | 108 | 550 | 535 |